Click each step to see the action. You can also click the image or use the arrow keys to continue to the next step

  • 1. Turn on the wireless receiver and TV. This may take up to two minutes, during which no lights may be visible on the receiver.
  • 2. Wait until you see the connection instructions appear on the TV.
  • 3. Go to the wireless transmitter (VAP2500 or VAP3400) and confirm that it is powered on and connected to the Fibe modem via an Ethernet cable.
  • 4. On the front of the wireless transmitter, confirm that the Wi-Fi light is green, either solid or flashing.
  • 5. Press the WPS button on the wireless transmitter. The bottom green light will begin to flash.
  • 6. Within two minutes, go back to the wireless receiver and press the OK button.
  • 7. The receiver should reconnect to the transmitter and restart. This may take up to two minutes. When you see the Fibe TV logo on the screen and a green Wi-Fi light on the receiver, the pairing was successful. Press the select button on your remote to start watching TV.