How to connect devices to the Wi-Fi network on my Bell Hub 2000 using WPS

Next stepPrevious step

How to connect devices to the Wi-Fi network on my Bell Hub 2000 using WPS

Click each step to see the action. You can also click the image or use the arrow keys to continue to the next step

Note: You appear to have Javascript, also known as “Active Scripting”, turned off in your web browser. As a result you may not see the illustrations as described until you enable it.

If your computer or wireless device has a Wi-Fi Protected Setup (WPS) button, you can connect it to your primary Wi-Fi network quickly, without entering your Wi-Fi password.
1. Turn on your computer or wireless device.
2. Press and hold the WPS button on your modem for 5 seconds, until the WPS light starts blinking.

You will have 2 minutes to connect your Wi-Fi device. If you do not complete the process in time you will need to restart this step.
3. Press and hold the WPS button on your computer or Wi-Fi device for 5 seconds. The password for your primary Wi-Fi network will automatically load into the device and connect to the network.