Click each step to see the action. You can also click the image or use the arrow keys to continue to the next step

  • You can program your Slim remote to control other devices, such as your TV. To do so requires the programming code associated with your brand of TV. Programming codes are available in the remote’s manual. Unfortunately, while we try to accommodate most makes and models of television, some may not be supported.
  • 1. Turn on your TV and your Fibe TV receiver.
  • 2. Press and hold the options button for three seconds, until the green light blinks twice.
  • 3. Enter the 4-digit code for your TV’s brand (or code 0001 to search all brands).
    • If the code you entered was correct, the green light will blink twice.
    • If the code you entered was incorrect, the green light will light up for 2 seconds. Try again.
    • If no code was entered within 10 seconds, you need to start over at Step 2.
  • 4. Press and hold the power button until your TV turns off.
    • This could take up to 5 minutes (or up to 15 minutes if searching all brands). The green light will slowly blink as the remote cycles through the codes.
  • 5. Once your TV switches off, let go of the power button and press select. The green light will blink twice to confirm it has been successfully programmed.
    • If the green light blinks five times, it means a match wasn’t found. Please start again at Step 2 using code 0001 to search all brands.